The Husqvarna 2042LS garden tractor lawn mower is powered by an Endurance Series engine from Briggs and Stratton. This engine is a 2 cylinder model with cast iron liners. It has a total displacement of 0.508 liters and uses a full pressure lubrication system to keep everything working well. The Briggs and Stratton engine on the 2042 LS lawn tractor has a paper type air filter to prevent small particles and dust from getting into the engine. Power from the engine is transferred to the wheels of the lawnmower through a hydrostatic transmission. This gearbox setup gives the lawnmower infinite speeds going forwards and backwards which makes it an automatic.
The rear wheels on the Husqvarna 2042LS lawn mower, which drive it forwards each measure 20×10 (20 inch diameter, 10 inch width), while the front wheels, which are responsible for steering the 2042 LS measure 15×6 (15 inch diameter, 6 inch width). Attached to the leading and trailing edges of the mower deck are 4 anti scalping wheels in total. These guide the deck evenly over the cutting surface making sure that the blades never catch the ground. The mower deck itself has a cutting width of 42 inches. This deck has 2 blades and is made from strong steel. The deck has a 3 inch operating range, from a low of 0.5 inches above the ground to a high of 3.5 inches above the ground. In total, there are 6 operating heights. The deck is raised and lowered via a spring assisted lever.
The fuel tank on the Husqvarna 2042LS has a capacity to hold up to 9.5 liters (2.5 US gallons) of gasoline. A similar model to this one is the Husqvarna YTH2042 garden tractor lawn mower as it has both the same power from the engine and the same cutting width. Make sure to leave your thoughts below on this garden tractor lawn mower.
Have Your Say! Leave A Review Do you love or hate this tractor? You can have your say below by leaving review.